ADV SOLUTION

Acts in minutes to remove epoxy, electrophoretic, and polyester coalings, leaving treated item ready for re-use. Dip tank powder coat remover. Stored in a tank with a close fitting lid. A water seal can also be applied, this reduces smell and evaporation, but can slow down the removal process. After a few minutes the powder expands and leaves the metal in a skin, restoring the metal surface to its original pre-coaled condition. Ready to re-coat after a thorough rinse with water. Remove the powder coat skins or flakes from the ADV solution with a very fine wire mesh. Not suitable for Magnesium or similar alloys. 10 litre and 205 litre containers.